Ergotron StyleView Betriebsanweisung PDF herunterladen (Seite 19)

19 of 23

a b c

888-24-310-G-00 rev. C • 10/14

ENGLISH

How to Change Power System Battery

Follow Battery Charge/Discharge Initial Power on steps a, b, c.

Cart Storage Instructions

Turn o all mounted equipment.

Plug power cord into appropriate wall outlet to fully charge battery to 100% (all indicator lights will be illuminated). Power system must be fully charged

before storing!

Once battery has been charged to 100%, turn power system o .

Turn power system o by holding down the AC Outlet Power button for 1 - 3 seconds. Power light will shut o .

Recharge battery a minimum of every 90 days.

NOTICE:

Warranty on fully charged batteries left in an unused state for more than three (3) consecutive months is automatically void.

Warranty on fully discharged batteries left in an unused state for more than three (3) consecutive days is automatically void.

If the battery is stored too long without recharging, the electronics in the battery may cause the battery voltage to drop to an unsafe level. If this happens, the power system will

enter a low charge recovery mode when plugged into power source. Once the process has  nished the power system will resume charging as normal. if the low charge recovery

process takes longer than 45 min please contact Ergotron Customer Care.

Storage - The battery needs to be fully charged before storing and the battery must be recharged a minimum of every 90 days.

• The recommended cart storage temperature is 25°C (77°F). At this temperature, the battery’s age-related

capacity loss is minimized. The minimum storage temperature is -20°C (-4°F) and the maximum storage

temperature is 50°C (122°F). The recommended humidity range for storage is 5-95% rH.

-20 °C

- 4 °F

50 °C

122 °F

Relative

Humidity

Range